Access to Internal Documentation

These documents are available in various formats, in order to request a copy, please contact SNGP.NPMS@tpsgc-pwgsc.gc.ca including the required titles, their document numbers, as well as your complete contact information. Orders will be filled as quickly as possible.

Commissioning

  • PSPC Commissioning Manual (CP.1), 4th edition, November 2006 (RPB document number: CM 9e)

Environmental

  • Environmental Management System Manual (RPB document number: EA 162e)

Mechanical and Maintenance Engineering

  • Control of Legionella in Mechanical Systems: guidelines for building owners, design professionals, and maintenance personnel, MD 15161, September 2006 (RPB document number: ME 220e)
  • Laboratory fume hoods: guidelines for building owners, design professionals and maintenance personnel, MD15128; May 2008, revised April 2009 (ME 225e)
  • Addendum A to Laboratory fume hoods: guidelines for building owners, design professionals and maintenance personnel, MD15128; May 2008, revised April 2009 (ME 226e)
  • Perchloric acid fume hoods and their exhaust systems: guidelines for the use of perchloric acid fume hoods in PSPC and other government of Canada facilities, MD 15129, March 2006 (RPB document number: ME 221e)
  • Best Practice: Prescribing indoor humidity levels for federal buildings, September 2006 (RPB document number: IAQ 59e)

Security

  • Speech Security: A Best Practice Guide, March 2002 (RPB document number: PNA 131e)
  • A Guide to Using Protective Film for Security Upgrade of Glass Windows, June 2005 (RPB document number: EP 13e)

Thermography

  • Air tightness and pressure monitoring (Building performance evaluation series), March 1988 (RPB document number: BPD 36b)
  • Generic methodology for thermographic diagnosis of building enclosures (A), 1982 (RPB document number: TH 8b)
  • Identification of Convection Heat Loss on Exterior Cavity Wall Assemblies, April 1999 (RPB documentation Centre number: TH 33e)
  • Infrared Thermographic Investigation Procedures for Four Types of Generic Exterior Wall Assemblies, April 1999 (RPB document number: TH 34e)
  • Minimum Resolvable Temperature Differences (MRTD) Testing: Equipment specification for building performance diagnostics, 1981 (RPB document number: TH 14)
  • Moisture Content Inspections (Building performance evaluation series), March 1988 (RPB document number: BPD 40b)
  • Principles of Material Selection and Component Design for Optimum Performance of Building Enclosures, 1982 (RPB document number: TH15)
  • Thermal Environment Evaluation, March 1988 (RPB document number: BPD 3b)
  • Thermal Patterns Created by Moisture Accumulation Within Exterior Masonry Walls, October 2005 (RPB document number: TH 41e)
  • Thermal Patterns on Solid Masonry and Cavity Walls as a Result of Positive and Negative Building Pressures, SPIE Vol. 5782, Thermosense XXVII, Orlando, February 2005 (RPB document number: TH 42)
  • Thermal Performance Patterns on Solid Masonry Exterior Walls of Historic Buildings, April 1995 (RPB document number: TH 32e)
  • Thermal Resistance Measurement (Building performance evaluation series), March 1988 (RPB document number: BPD 39b)
  • Thermographic inspections of building enclosures (Building performance evaluation series), March 1988 (RPB document number: BPD 38b)
  • Thermographic interpretation of building enclosure deficiencies in Canadian public buildings, 1980 (RPB document number: TH 12)
  • Thermography - a building diagnostic tool, 1983 (RPB document number: TH 24)
  • Use of infrared thermography in detection, remediation and commissioning of thermal comfort problems in office buildings (The), February 2001 (RPB document number: TH 38e)
  • Using infrared thermography to evaluate workplace comfort complaints, October 2001 (RPB document number: TH 36e)
  • Verification of Dynamic Buffer Zone (DBZ) Wall Assembly Performance Using Infrared Thermography, January 2002 (RPB document number: TH 37e)

Other

  • RPB National Construction, Renovation and Demolition Non-Hazardous Solid Waste Protocol, February 2002 (RPB document number: EA 152e)
  • Use of Fly Ash and Slag in Concrete: A Best Practice Guide, January 2005 (RPB document number: ST 252e)